- Minimum Order Quantity :
- Unit of Measure :
- Price Range :
- 3.00 - 5.00 USD ($)
- Adhesive Type :
- Material :
- Grade :
- Purity :
- Application :
- Sealing windows in oven doors and flues on gas appliances,flanged pipe joints, access doors.Formed in place of gaskets for gearboxes, compressors and pumps.Sealing trailers, truck cabs.Bonding and sealing appliance parts.Anti abrasion coating.Sealing of marine cabins and windows.Filling and caulking joints in sheet metals stacks, duct work and equipment housings.
- Color :
- Physical State :
Dow Corning Make - Silastic 732 Silicon Sealant for High temperature applications
Product description Silastic 732 Silicon Sealant :
Silastic 732 Sealant is a high performance, one-part silicone sealant that offers excellent adhesion (usually without a primer), elasticity, wide temperature resistant and long life reliability.
Features of Silastic 732 Silicon Sealant:
Ease of use - one part, no mixing required, Non slumping, Non shrinking.
Does not crack, crumble or dry out in direct Sunlight.
Excellent temperature range -60 Degrees Centrigrade to + 205 Degrees Centrigrade.
Meets FDA requirement No 21 CFR 177-2600 (food contact), MIL-A-46106 parts I & II.
Silastic 732 Silicon Sealant - Bonds almost all surfaces.
Silastic 732 Silicon Sealant is Chemically stable.
Colors available in Silastic 732 Silicon Sealant:
Clear, Black & White
Uses of Silastic 732 Silicon Sealant
Sealing windows in oven doors and flues on gas appliances,
flanged pipe joints, access doors.
Formed in place of gaskets for gearboxes, compressors and pumps.
Sealing trailers, truck cabs.
Bonding and sealing appliance parts.
Anti abrasion coating.
Sealing of marine cabins and windows.
Filling and caulking joints in sheet metals stacks, duct work and equipment housings.
Packing Details of Silastic 732 Silicon Sealant :
100 GM tube & 300 GM cartridges (Suitable Caulking guns available).
Typical Properties Silastic 732 Silicon Sealant :
Flow, sag or sump - nil
Tack free time at 25C & 50 % RH - 10 to 20 min.
Cure time at 25C & 50 % RH -1 to 2 days
After curing for 7 days
ASTM D 676 - Durometer Hardness, Shore A - 30
ASTM D 412 - Ultimate Tensile Strength - 350 psi (mpa)
ASTM D 412 - Elongation % - 500
15, Dhamanwala Complex, Opp. Batliboi, Gidc Cross Road, Pandesara, Surat, Gujarat, 394221, India