home

Devcon Plastic Steel Putty (A)

home
Devcon Plastic Steel Putty (A)
Devcon Plastic Steel Putty (A)
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 4500 INR
    Product Specifications
    • 21-23 Celsius (oC)
    • Chemical Grade
    • Grey
    • Liquid
      Product Description


      Devcon Plastic Steel Putty A

                  Description: Devcon Plastic Steel Putty is a steel-filled epoxy putty that cures at room temperature and is designed for filling, rebuilding, and bonding metal surfaces.

      Intended Use: Devcon Plastic Steel Putty is a Patching and repairing areas where welding or brazing would be undesirable or impossible

      Product features: Devcon Plastic Steel Putty Applies easily to vertical surfaces, Machinable to metallic finish, Bonds to aluminium, concrete, and many other metals, Resistant to chemicals and most acids, bases, solvents, and alkalis.

      Technical Properties of Devcon Plastic Steel PuttyColour Grey
      Mix Ratio by Volume 2.5:1
      Mix Ratio by Weight 9:1% Solids by Volume 100
      Pot Life @ 75F 45 min.
      Specific Volume 11.9 in.(3)/lb
      Cured Shrinkage 0.0006 in./in.
      Specific Gravity 2.33 gm/cc
      Temperature Resistance Wet: 120 Degrees F; Dry: 250 Degrees F
      Coverage/lb 48 sq. in 1/4 in
      Cured Hardness 85D
      Dielectric Strength 30 volts/mil
      Dielectric Constant 37.5
      Adhesive Tensile Shear 2800 psi
      Compressive Strength 8260 psi
      Modulus of Elasticity 8.5 x 10(5) psi
      Flexural Strength 5600 psi
      Coefficient of Thermal Expansion 48 [(in)/(in) x F)] x 10(-6)
      Thermal Conductivity 1.37 (cal x cm) / (sec. x cm(2) x C) x 10 (-3)
      Cure Time 16 hrs
      Recoat Time 10-12 hrs
      Mixed Viscosity Putty

      Test Conducted :Cure Shrinkage ASTM D 2566
      Adhesive Tensile Shear ASTM D 1002
      Dielectric Strength, volts/mil ASTM D 149
      Dielectric Constant ASTM D 150
      Flexural Strength ASTM D 790
      Compressive Strength ASTM D 695
      Cured Hardness Shore D ASTM D 2240
      Coef. of Thermal Expansion ASTM D 696
      Thermal Conductivity ASTM C 177
      Modulus of Elasticity ASTM D 638

      Application Instructions : Spread mixed material on repair area and work firmly into substrate to ensure maximum surface contact. Plastic Steel
      Devcon Putty A fully cures in 16 hours, at which time it can be machined, drilled, or painted.
      Place fiberglass sheet, expanded metal, or mechanical fasteners between repair area and Plastic Steel Putty A prior to application.

      Trade Information
      • Surat
      • Cash Against Delivery (CAD) Cash Advance (CA) Cash in Advance (CID) Cheque
      • 10 Per Day
      • Days
      • If order is confirmed we will reimburse the sample cost
      • Australia Central America South America Western Europe Middle East Eastern Europe Asia North America Africa
      • All India
      Related Products





































      right arrow
      left arrow
      Contact Us

      15, Dhamanwala Complex, Opp. Batliboi, Gidc Cross Road, Pandesara,, Surat, Gujarat, 394221, India
      Phone :+918045802308