home

Devcon Aluminum Putty (F)

home
Devcon Aluminum Putty (F)
Devcon Aluminum Putty (F)
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 7920 INR
    Product Specifications
    • Aluminium Foil
    • Other
    • Devcon Aluminum Putty (F)
    • original
      Product Description

      Devcon Aluminum Putty F

      Description: Devcon Aluminum -filled epoxy putty for dependable non rusting repairs to aluminum castings, machinery, and equipment widely used in HVAC applications.

      Intended Use : 
      Devcon Aluminum Putty is a Patch for aluminum castings; make jigs, dies, and holding fixtures.

      Product features: Devcon Aluminum Putty Can be machined, drilled, or tapped using conventional metalworking tools Bonds to aluminum, concrete, and many other metals Fills voids or pores in castings.

      Limitations: Devcon Aluminum Putty is Not recommended for long term exposure to concentrated acids and organic solvents.

      Typical Physical Properties: Technical data should be considered representative or typical only and should not be used for specification purposes Cured 7 days 75 Degrees Fahrenheit.
      Mix Ratio by Volume - 4:1 Mix Ratio by Weight - 9:1 % Solids by Volume - 100 Pot Life 75degrees 60 min Specific Volume 17.5 in. (3) /lb Temperature Resistance Wet: 120F; Dry: 250degrees 
      Coverage/lb - 70 sq.in. /lb. 1/4" Cured Hardness - 85D
      Coefficient Degrees Fahrenheit Thermal Expansion - 29 [(in.)/(in). x F)] x 10(-6)
      Thermal Conductivity 1.73 [(Cal x cm)/(sec x cm(2) x C)] x 10(-3)
      Cure Time - 16 hrs
      Recoat Time - 10-12 hrs
      Mixed Viscosity - Putty
      Test Conducted:  Compressive Strength ASTM D 695
      Cured Hardness Shore D ASTM D 2240
      Dielectric Constant ASTM D 150
      Modulus of Elasticity ASTM D 638
      Cure Shrinkage ASTM D 2566
      Adhesive Tensile Shear ASTM D 1002
      Dielectric Strength, volts/mil ASTM D 149
      Coef. of Thermal Expansion ASTM D 696
      Flexural Strength ASTM D 790
      Thermal Conductivity ASTM C 177
      Application Instructions: Spread mixed material on repair area and work firmly into substrate to ensure maximum surface contact. Devcon Aluminum Putty F will fully cure in 16 hours, at which time it can be machined, drilled, or painted. FOR BRIDGING LARGE GAPS OR HOLES Place fiberglass sheet, expanded metal, or mechanical fasteners between repair area and Devcon Aluminum Putty F prior to application.


      Trade Information
      • Surat
      • Cash Against Delivery (CAD) Cash Advance (CA) Cash in Advance (CID) Cheque
      • 100 Per Day
      • 1 Days
      • If order is confirmed we will reimburse the sample cost
      • Australia Central America South America Western Europe Middle East Eastern Europe Asia North America Africa
        Related Products






























        right arrow
        left arrow
        Contact Us

        15, Dhamanwala Complex, Opp. Batliboi, Gidc Cross Road, Pandesara,, Surat, Gujarat, 394221, India
        Phone :+918045802308