CRC METAL FREE PASTE ANTI SEIZE COMPOUND

1. GENERAL DESCRIPTION

Multi-purpose high temperature ceramic separating and mounting paste. CRC Metal Free Paste is a white, metal-free paste, based on high-tech ceramic solid lubricants and matured additives suspended in a mineral/synthetic premium grade stable oil. It is an effective anti-seize formulation for applications from -40C up to +1.400C, preventing metal-to-metal contact, seizing, galling and fretting corrosion.

2. FEATURES

• Contains no free metals

• Reduces friction and wear, even when the base oil has already evaporated

• High pressure and high temperature resistance

• Protects against burning-in, corrosion and seizing

• No galvanic corrosion potential

• Fast and easy mounting of threaded parts

• Facilitates disassembly of all parts exposed to high temperatures, even after prolonged use in corrosive atmospheres

• Stops and prevents disc brake noise and vibration

• Hot and cold water resistant

• Free from lead, copper, nickel, and their compounds

• Aerosol formulation does not contain chlorinated solvents and uses LPG propellant

3. APPLICATIONS

• Machines

• Flanges

• Disc brakes

• Cylinder heads

• Threaded parts

• Exhaust screw connections

• Heat exchangers

• Turbines

• Fittings

• Bolts, nuts, screws

• Plugs, shafts, bushings, splines

• Pipe joints

4. DIRECTIONS

• The surfaces to be treated should be clean, dry and grease-free. Wire-brush scaled parts and clean with an oil-free solvent like CRC Industrial Degreaser.

• A thin, even film should be applied either by spraying or by brushing.

• Assembled parts can slowly be put in motion.

• Avoid mixing with other products.

Test before use on plastics and rubber.

• 
  

• Do not use on energised equipment, oxygen systems or in presence of acetylene.

• Use aerosol only in ventilated areas.

• A safety data sheet (MSDS) according EU-directive 93/112 is available for all CRC products.

5. TYPICAL(*) PRODUCT DATA (without propellant)

Appearance : homogeneous, white paste

Aerosol properties

Flash point (open cup) : < 0C

Boiling range (solvent) : 40 - 65C

Vapour density (vs. air = 1) : 3

Specific gravity (@ 20C) : 0,88

Dry film properties

Specific gravity (@ 20C) : 1,4

Flash point (open cup) : > 200C

Dropping point : none

Penetration (ISO 2137) : 200 - 220

Low temperature stability : -40C

Temperature resistance

- lubrication : 300C

- anti-seize : 1400C**

Hot water resistance (DIN 51807 T1, 40C, 90C) : 1

Corrosion (DIN 50021) : > 500h

Four Ball Wear (DIN 51350, 4) : 3800/4000 N

6. PACKAGING

aerosol : 12 x 300 ml

tubes : 6 x 100 g