JAY AGENCIEZ
Devcon Plastic Steel 5 Minute Putty

Devcon Plastic Steel 5 Minute Putty

Send Inquiry

DEVCON Plastic Steel 5 Minute Putty SF

Description: Devcon Plastic Steel 5 Minute Putty is a Steel-filled, fast-setting epoxy putty for filling, and bonding metal surfaces.

Intended Use: Devcon Plastic Steel 5 Minute Putty Restores worn on fatiqued metals; patches castings; makes jigs and fixtures; rebuilds pump and valve bodies; restores bearing journals and races,

Devcon Plastic Steel 5 Minute PuttCan also stop online Leakages in Transformers, Pipes, Radiators Etc.

Devcon Plastic Steel 5 Minute Putty: Bonds to aluminum, concrete, and many other metals

Features of Devcon Plastic Steel 5 Minute Putty: It is Resistant to chemicals and most acids, bases, solvents, and alkalis. Applies easily to vertical surfaces.

Limitations of Devcon Plastic Steel 5 Minute Putty: Machinable to metallic finish not recommended for long term exposure to concentrated acids or o organic solvents.

Typical : Technical data should be considered.

Physical Properties of Devcon Plastic Steel 5 Minute Putty: representative or typical only and should not be used for specification purposes.

Cured 7 days @ 70 degrees Degrees Farenheight

Devcon Plastic Steel 5 Minute Putty Color - Dark Grey

Devcon Plastic Steel 5 Minute Putty Mix Ratio by Volume - 1:1

Devcon Plastic Steel 5 Minute Putty Mix Ratio by Weight - 1.7:1

Devcon Plastic Steel 5 Minute Putty % Solids by Volume - 100

Devcon Plastic Steel 5 Minute Putty Pot Life @ - 75F 5min

Devcon Plastic Steel 5 Minute Putty Specific Volume - 12.2 in (3)/lb

Devcon Plastic Steel 5 Minute Putty Cured Shrinkage - 0.0006 in./in

Devcon Plastic Steel 5 Minute Putty Specific Gravity - 1.96 gm/cc

Devcon Plastic Steel 5 Minute Putty Temperature Resistance - Dry: 200degree centigrade F

Devcon Plastic Steel 5 Minute Putty Coverage/lb - 49 sq.in. / lb.½

Devcon Plastic Steel 5 Minute Putty Cured Hardness - 85D

Devcon Plastic Steel 5 Minute Putty Dielectric - 30

Devcon Plastic Steel 5 Minute Putty Strength - volts/mils

Devcon Plastic Steel 5 Minute Putty Dielectric Constant - 35

Devcon Plastic Steel 5 Minute Putty Adhesive Tensile Shear - 2,026 psi

Devcon Plastic Steel 5 Minute Putty Compressive Strength - 10,400 psi

Devcon Plastic Steel 5 Minute Putty Modulus Degrees Faren

Devcon Plastic Steel 5 Minute Putty Height Elasticity - 7.5 psi x 10(5) in

Devcon Plastic Steel 5 Minute Putty Flexural Strength - 7,680 psi

Devcon Plastic Steel 5 Minute Putty Coefficient Thermal Expansion - 34 [(in.) x (in). x F)] x 10(-6)

Devcon Plastic Steel 5 Minute Putty Thermal - 2.65 [(cal x Conductivity cm) / (sec x cm(2) x C)] x 10 (-3)

Devcon Plastic Steel 5 Minute Putty Cure Time - 1 hrs

Devcon Plastic Steel 5 Minute Putty Recoat Time - 15-30 min

Devcon Plastic Steel 5 Minute Putty Mixed Viscosity - Putty

Tests Condected

Cure Shrinkage ASTM D 2566

Adhesive Tensile Shear ASTM D 1002

Dielectric Strength, volts/mil ASTM D 149

Co ef. of Thermal Expansion ASTM D 696

Flexural Strength ASTM D 790

Thermal Conductivity ASTM C 177

Compressive Strength ASTM D 695

Cured Hardness Shore D ASTM D 2240

Dielectric Constant ASTM D 150

Modulus Elasticity ASTM D 638

Surface Preparation: 1. Thoroughly clean the surface with Devcon Cleaner Blend 300 to remove all oil, grease, and dirt.

Tag:Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul,SOLAR POWERED, AUTODARKENING SCREEN, AUTODARKENING HELMET