Devcon Flexane 80 Rubber Putty

Devcon Flexane 80 Rubber Putty
Devcon Flexane 80 Rubber Putty
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 3000.00-
    Product Specifications
    • Rubber Putty
    • For Sealing and Fixing Purpose
    • Black
    • Liquid
      Product Description

      Devcon Flexane 80 Putty

      Description: Devcon Flexane 80 is a Trowelable urethane for repairing and lining process equipment exposed to wear, impact, abrasion, vibration, and expansion/contraction. 

      Intended Use: Devcon Flexane 80 is a Repair and rebuild conveyor belts Line process equipment to dampen noise, Line concrete control joints. Cast flexible moulds, fixtures, and parts Pot and encapsulate.Product features: Trowels on smoothly Cures to tough, medium-hard rubber (Shore 87A)

      Devcon Flexane 80 Putty Chemical Resistance: Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion)  75°F)

      1,1,1-Trichloroethane - Poor

      Aluminum Sulfate 10% - Very good

      Cutting Oil - Fair

      Gasoline (Unleaded) - Poor

      Hypocaloric 10% - Very good

      Hydrochloric 36% - Very good

      Isopropanol - Poor

      Methyl Ethyl Ketone - Poor

      Phosphoric 10% - Very good

      Potassium Hydroxide 40% - Very good

      Sodium Hydroxide 50% - Very good

      Sodium Hypochlorite - Very good

      Xylene - poor

      TESTS CONDUCTED on Devcon Flexane 80 Putty
      Devcon Flexane 80 Putty Tensile Strength (Urethanes) : ASTM D 412
      Devcon Flexane 80 Putty Dielectric Strength, volts/mil ASTM D 149
      Devcon Flexane 80 Putty Cured Hardness Shore D ASTM D 2240
      Devcon Flexane 80 Putty Cure Shrinkage ASTM D 2566
      Devcon Flexane 80 Putty Tear Resistance ASTM D 624
      Devcon Flexane 80 Putty Maximum Elongation ASTM D 412

      Surface Preparation for Application of Devcon Flexane 80 Putty : 

      For Applying Devcon Flexane 80 Putty on METAL SURFACES, thoroughly clean area to be repaired, rebuilt, or lined with Devcon Cleaner Blend 300. Remove any oil, grease, or dirt. Roughen surface by grinding with a coarse wheel or an abrasive disc pad. To prime, this surface, apply a coat of Devcon FL-10 Primer and allow to dry tack-free for 15 minutes. If the metal surface requires maximum tear resistance or is exposed to moisture, or if submerged in water, use Devcon FL-10 and Devcon FL-20 Primer.


      For Applying Devcon Flexane 80 Putty RUBBER SURFACES, a thoroughly clean area with an abrasive pad and Devcon Cleaner Blend 300. The surface can also be roughened with a grinding wheel so that it is coarse and free from oil and dirt that may clog the "pores" of the rubber. Wipe or roughen the surface with Cleaner Blend 300 until the cloth no longer picks up the colour of the rubber. The rubber should appear new or deeper in colour. To prime, this surface, apply a coat of Devcon FL-20 Primer and allow to dry tack-free for 15-20 minutes. Use Devcon FL-40 Primer on "hard-to-bond" rubber surfaces as this gives ultimate feel resistance. Multiple coats may be necessary for porous rubber surfaces.For MAXIMUM ADHESION, sandblast the surface with an angular abrasive until a minimum depth profile of 2-3 mils is met. Blast to near-white finish specification SSPC-SP5 (Steel Structure Painting Council). Prime surface immediately after sandblasting to prevent oxidation.


       

      Trade Information
      • Cash in Advance (CID), Cash Advance (CA)
      • 10 Per Day
      • 1-2 Days
      • All India
        Contact Us

        15, Dhamanwala Complex, Opp. Batliboi, Gidc Cross Road, Pandesara, Surat Gujarat India +918037302043
        Phone :+918037302043