Devcon Brushable Ceramic

Description

A brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion.

Intended Use

Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces.

Product

Acceptable for use in meat and poultry plants

Features

Excellent chemical resistance
Temperature resistance to 350^oF
Applies easily with short - bristle brush or roller
Low viscosity, self - leveling liquid

Limitations

None

Typical

Technical data should be considered representative or typical only and should not be used for specification purposes.

Physical

Cured 7 days @ 75^oF

Storage

Store at room temperature.

Compliances

Approved for use in meat and poultry plants (red only)

Chemical

Resistance

Chemical resistance is calculated with a 7 day, room temp. cure ( 30 days immersion @ 75^oF

Precautions

Please refer to the appropriate material safety data sheet (MSDS) prior to using this product.
For technical assistance, please call 1-800-933-8266
FOR INDUSTRIAL USE ONLY

Warranty

Devcon will not replace any material found to be defective. Because the storage, handling and application of this material is beyond our control, we can accept no liability for the results obtained.

Disclaimer

All information on this data sheet is based on laboratory testing and is not intended for design purposes. ITW Devcon makes no representations or warranties of any kind concerning this data.

Order

11760 (Red) 2 Ib.

Information

11760 (Blue) 2 Ib.