JAY AGENCIEZ
CRC Gasket Remover

CRC Gasket Remover

Send Inquiry

GENERAL DESCRIPTION

Gaskets, paints and adhesives stripper.

CRC Gasket Remover is a blend of non-chlorinated powerful solvents, formulated for the easy removal of gasket cement, paints, adhesives and sealants. It helps to protect equipment surfaces by eliminating damage caused by excessive scraping.

FEATURES

  • High penetrating power
  • Controlled evaporation
  • Clings to vertical surfaces, ideal for fixed industrial equipment.
  • Softens and eases removal of conventional and formed in-place gaskets, gasket cements and sealants.
  • Excellent stripper for paints, varnishes and lacquers
  • Loosens carbon deposits
  • Dissolves tar, greases, dried oils, adhesives, resinous deposits, etc.
  • Avoids accidental and costly damage caused by excessive scraping.
APPLICATIONS

Removal of :
Gasket residues on :
  • cylinder heads
  • crankcases
  • gearboxes
  • water pump flanges
Carbon deposits on :
  • valve seats
  • cylinder heads
  • metal engine components
Paints and coatings on :
  • metals
  • stone
  • hard surfaces
  • Mastics
  • Putties
  • Sealants
  • Adhesives
DIRECTIONS
  • Mask painted surfaces from over spray. Wear eye protection and non-porous (rubber) gloves.
  • Shake well or stir before application and apply a thick film on area to be treated.
  • Allow product to work for 10-20 minutes. Remove residues with a rag, stiff bristled brush or putty knife. Repeat application if necessary.
  • Clean treated surface with a solvent cleaner (CRC Fast Dry Degreaser, CRC Industrial Degreaser) to remove waxy product film.
  • Test before use on plastics or rubber. Do not use on energised equipment.
  • Use only in well ventilated areas. A safety data sheet (MSDS) according EU93/112 is available for all CRC products.
TYPICAL(*) PRODUCT DATA
  • Appearance : viscous opaque liquid
  • Specific gravity (@ 20°C) : 0,92
  • Boiling range (solvents) : 40-200°C
  • Freezing point : < -20°C
  • Flash point (closed cup) : < -0°C
  • pH : neutral
  • Viscosity : 700-1500 mPa.s (thixotropic)
  • Kauri-Butanol value (solvents) : > 120
  • Vapour density (solvents, vs. air = 1) : > 2
  • Non-volatile content : 1,5% wt
PACKAGING
  • aerosol : 12 x 300 ml
  • bulk : 20 L