JAY AGENCIEZ
CRC Food Grade Silicone Spray

CRC Food Grade Silicone Spray

Send Inquiry

CRC Food Grade Silicone Spray

GENERAL DESCRIPTION

Synthetic lubricant and release agent.

Based on a premium grade silicone fluid exhibiting superior lubrication. CRC Silicone reduces friction in most metal and non-metal applications.The silicone lubricating film meets USDA-regulations for use in food processing applications where incidental food contact with the lubricant may occur.
FEATURES

  •     Formulated using only food grade acceptable components.
  •     Forms an inert, stable, non-hardening film.
  •     Eliminates squeaking, binding and sticking of metals, plastics, rubbers and other surfaces.
  •     Low surface tension gives better coverage and deeper penetration.
  •     Excellent separation and release properties.
  •     Colourless, tasteless and odourless.
  •     Effective over a wide temperature range.
  •     Harmless to most rubbers and plastics (test prior to use).
  •     Aerosols are pressurised with non-flammable CO2 , giving an active product content of 97%.
  •     Meets FDA-regulation CFR 21-178.3570 and is authorised by USDA - class H1, to be used as a lubricant with incidental food contact.
APPLICATIONS

Lubricant for :
  •  Food processing and handling equipment
  •  Chutes
  •  Guides
  •  Rails
  •  Conveyors
  •  Bottling machinery
  •  Slicers
  •  Ovens
  •  Freezers
  •  Knives and saws
  •  Any food industry lubrication point.
  •  Release and separating agent
DIRECTIONS
  • Spray light, even film on areas requiring lubrication or protection.
  • Use extension tube for hard-to-reach areas.
  • Repeat application if necessary.
  • Excess or spilled product can be removed with CRC Foodkleen.
  • Do not use on energised equipment.
  • Do not use on areas to be painted.
  • A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
TYPICAL(*) PRODUCT DATA (without propellant)
  • USDA category : H1
  • Appearance : clear, water-white liquid
  • Specific gravity (@ 20°C) : 0,69
  • Distillation range of solvents : 55-70°C
  • Flash point (closed cup) : < 0°C
  • Vapour density (vs. air = 1) : 3
  • Dry film properties
  • Flash point (closed cup) : > 300°C
  • Pour point : < -40°C
  • Temperature range : -40 to +200°C
  • Long term stability temperature (in air) : 150°C
  • Surface tension : 21 mN/m
  • Dielectric strength : 35 kV
  • Viscosity (@ 20°C) : 12.500 mPa.s
PACKAGING
  • aerosol : 12 x 400 ml