Anti Seize and Lubricating Compounds
For Temperature Resistance upto 1400 degrees Centigrade from Molykote.
MOLYKOTE® G-N PLUS SOLID LUBRICANT PASTE
Solid lubricant paste for the assembly and running-in of metal components
Service temperature: - 25 to +450 Degrees Centigrade, With reduced air access upto+630 Deg.
Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gear-boxes. Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting. Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.
MOLYKOTE- 1000 Solid lubricant paste
High Performance Lubricants
Temperature ( - 30Degrees Centigrade to +650Degrees Centigrade )
Suitable for bolted joints that are subjected to high temperatures up to 650 Centigrade and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary.
Used successfully for cylinder head bolts, nozzle head screws of plastic injection molding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges.
Can be used over a wide range of temperature ( - 30Degrees Centigrade to +650 Degrees Centigrade ) , High load-carrying capacity, Enables non-destructive dismantling. Even after long use at high temperatures Coefficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes, Good corrosion protection.
MOLYKOTE- HSC plus Solid lubricant paste
Solid lubricant paste; contains no lead or nickel temperature ( -30 Degrees Centigrade to + 1100Degrees Centigrade )
For metal/metal combinations that are subjected to high temperatures and frictional contacts which, typically for bolted joints, are free from lead or nickel. Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects, and also require a low and constant coefficient of friction. As a contact lubricant for electrically conducting components. Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants.
MOLYKOTE® P 37 Lubricant paste
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine. Temperature resistant upto 1400 degrees Cent.
Diesel Engine Oil, 20W40, 15W40, Total Quartz 9000, 5W40, Fully Synthetic Engine Oil, High Temperature Grease, H.T. Grease, High Temperature, Mos2 Based Lithium Grease, Wurth Multi Purpose Grease, British Petroleum, Energrease L 21 M, , Molykote, Antisieze, Compound, Molykote 1000, Molykote P-37, Molykote Hsc Plus, Molykote Br 2 Plus, Molykote G-N Plus, Metal Assembly Paste, Antisieze Compound, Molykote M 77, Molykote 111, Heat Resistant Grease, Coppaslip Antisieze Compound, Stag B